Publicité
Les langues disponibles
Les langues disponibles
Operating instructions
Using OSD controller
Setup menu can be accessed and controlled by OSD control joy stick on the side of cam-
era unit. Five commands are available with the joy stick.
Description of the joystick operation
1. SET Key (●) : Access to the menu or enter the setting. To enter the main menu,
press the Set Key down for about 1.5sec
2. UP/DOWN Key (▲/▼) : Choose the desired sub-menu and to move the cursor up or
down.
3. LEFT/RIGHT Key (◄/►) : Set up the value of the selected menu. Used to adjust the
desired menu selection and to move the cursor left or right.
4. '☟' denotes the long press down straightly for about 2 seconds
Description of the ZOOM&FOCUS adjustment
Works only when OSD Menu is inactive and IP is not connected.
i
1. ▲ : Zoom In
2. ▼ : Zoom Out
3. ◄ : Focus Near
4. ► : Focus Far
OSD menu startup
Camera SETUP menu can be accessed in two ways via web viewer. Most frequent controls
are available with the parameters directly in the below table. More complicated settings
such as PRIVACY, POINTING ZOOM & SMART MOTION settings are available via 'AD-
VANCED CAMERA MENU' by activating the camera OSD menu.
i
Lens Initializing is strongly recommended at the first stage of setup menu control.
10
Publicité
