Eneo PXC-2080Z03 D Mode D'emploi page 8

Assigning an IP address
To assign an IP address to the camera proceeded as follows: Click Network Configuration
on the Network Configuration menu.
• Depending on the service type, the network configuration can be in any of Static
IP, DHCP Client, or PPPoE. You need to set up the network camera according to your
network type.
• For static IP, select static IP and input values for IP address, NetMask, Gateway,
DNS1, DNS2 and click apply for saving settings. After apply, program will ask clos-
ing web browser for updates, which will take 20~30 seconds.
8