Schedule Watering - Rain Bird 400i Manuel D'utilisation

Schedule Watering

Step 1
Turn dial to the zone
you wish to program
Step 2
Use left UP/DOWN
arrow keys to select
1st start time to water
Step 3
Use right UP/DOWN
arrow keys to select
the run time for each
zone
Watering Times Per Day Options Hours From First Start Time
2 times per day
3 times per day
4 times per day
EXAMPLE: If the first start time for Zone 1 is
programmed for 8:00 AM and the user has selected
THREE TIMES, then the second start time will be at 12:00
PM and the third start time will be at 4:00 PM.
!
For start time details see page 16.
637589-01 Rev 1 (STP user manual (INTL)) source.indd 5
To set up a watering schedule for each zone in your yard, follow these steps below:
6 hours
4 and 8 hours
3, 6 and 9 hours
!
NOTE: The Controller is designed to prevent any
two zones from irrigating at the same time. This
feature is called "Program Stacking"
TIP: The best way to condense the irrigation schedule
is to set each zone's start time the same. For example: If
both Zone 1 and Zone 2 are scheduled to irrigate on the
same day and both start times are set for 8:00 AM (with a
10 minute run time), then Zone 1 would begin irrigating
at 8:00 AM and Zone 2 would begin irrigating at 8:10 AM
(after Zone 1 has stopped).
STPi Controller Operation Manual
Step 4
Select number of
times per day to
water. Default is
once per day (see
table below)
Step 5
Select the DAY(s) of
the week or ODD/
EVEN days you wish
to water
Step 6
Turn dial to each
active zone and
repeat steps 2-5
5
6/26/2008 2:19:04 PM