Philips AVENT SCD833/26 Mode D'emploi page 9

3 Make sure that the parent unit and the baby unit are at least 2.5 meters/
8.2 feet away from each other to avoid acoustic feedback.
4 Press the on/off button on the parent unit for 1 second to switch on the
parent unit.
-
1
Eco 20°C
-
1
Eco 20°C
Note: It takes less than 10 seconds to establish the link between the
parent unit and the baby unit.
1
Eco 20°C
When the baby unit is turned off, the parent unit will show the out of
range image. Make sure that the baby unit is switched on.
-
The display goes on, the linking image appears on the display and the
link light lights up red. The parent unit starts to search for the baby
unit.
When the parent unit and baby unit are linked, the link light lights up
green on the parent unit and one or more bars appear on the display.
If no connection has been established, the link light turns red, the
parent unit beeps three short beeps every 20 seconds and the out-of-
range image appears on the display.
9
English