AorBindicator
Not activated
PLAY TIMER
Start recording
PLAY TIMER
Not activated
| Using the Recording Timer
|
To play music after programming:
(after step 6)
@ Begin play of desired music source.
Programming for the recording time remains in the memory even
if the volume or source is changed during play.
@ After playing music, turn the unit off.
Direction displayed when unit is turned off is activated in the
recording timer. After playing music, check the direction ( [> or
<<] ) of the cassette to be recorded before turning the unit off.
To change the radio station to be recorded:
Press REC TIMER to clear the
indicator and follow steps 5 to 7.
To use the timer at the same time daily:
Check that
is displayed and turn the unit off.
Always turn the unit off before the programmed start time. The timer
does not activate if unit is on.
To check programming
Play and recording timer programming
can be checked.
Press TIMER ADJUST when unit is off.
The display automatically changes in the following order.
Display example: Play tape from 7:00 A.M. to 8:30 A.M. on play timer
A.B
@ Programmed time to start
@ Programmed time to finish
@ Programmed music source
(a'd) (@25)) and => (<5) are not displayed when batteries are
used as the power source.
@) Timer volume
© Original display
Using the play and recording timers in
combination
Example: Waking up to a cassette in the morning and recording
radio programming while away E)
@ Program play timer (A or B) for cassette play (page 24).
© Program recording timer for radio recording and insert recording
cassette into deck 2 (page 26).
®Insert the playback cassette into deck 1 and the recording cassette
into deck 2. In this case, the play timer operates only on deck 1.
When programmed times overlap
eWhen
recording is programmed
to begin during play timer
operation
Cancels play and begins recording.
eWhen
play is programmed
to begin during recording timer
operation E)
Continues recording. The play timer is not activated.
Time
aa