Domo DO-262A Mode D'emploi page 57

1. MODE- touch
CONTROL PANEL
With this touch you can select the
desired function. Every time when
pressing this touch the function will
change : AUTO – COOL – DRY –
FAN. The related indication light will
turn on on the control panel.
2. SLEEP-touch
You can use this touch for activating
the "sleep"mode.
3. Arrow touch
Use these touches to select the temperature or to adjust the timer. When
pressing both arrows at the same time you can switch between "C°" or "F°".
4. ON/OFF touch
To turn the unit of or on.
5. TIMER touch
With this function you can select when the unit must turn on or off.
6. FAN touch
With this touch you can select the fan speed : LOW – HIGH – AUTO. The
related indication light will turn on.
7. LED display
Will show het temperature and timer selections. When the "dry or "fan"
mode is selected, the display will show the room temperature.
ERROR CODES
Following error codes can be displayed on your airco :
- E1 : the sensor for the room temperature is not working. Turn off the unit and
remove the plug from the socket. Wait for 10 sec and plug the unit back in.
Turn on the unit. When the error codes repeats, you need to contact the after
sales service.
- E2 : The sensor of the dehumidifier doesn't work. Turn off the unit and re-
move the plug from the socket. Wait for 10 sec and plug the unit back in.
Turn on the unit. When the error codes repeats, you need to contact the after
sales service.
- E4 : The display is not functioning properly. Remove the plug from the sock-
et. Wait for 10 seconds. Plug the unit back in. When the error codes repeats,
57
DO-262A