Domo DO-262A Mode D'emploi page 64

DO-262A
key symbol will be shown on the display.
10. LCD DISPLAY
This button will clear the display on the airco unit and will turn on the light
of the display on the remote.
USE OF THE DIFFERENT FUNCTION BUTTONS
AUTO mode
Make sure the unit is plugged in.
Press the "mode"-button and select the "auto" mode.
Press the arrow buttons to set the temperature.
Press the "on/off" button to turn the airco on;
NOTE : when selecting the "auto" function, the airco will determine in which setting
it will work (airco – fan – dry), depending on the room temperature.
COOL/ FAN mode
Make sure the unit is plugged in.
Press the "mode" button and select desired function (cool or fan).
Press the arrow buttons to select the desired temperature.
Press the "fan speed" button to select the fan speed.
Press the "on/off" button to turn on the airco.
NOTE : when using the "fan" mode, no temperature will be displayed. The room
temperature can't be controled.
DRY mode
Make sure the unit is plugged in.
Press the "mode"button to select the "dry" function.
Use the arrow buttons to set the desired temperature.
Press the "on/off" button to turn on the airco.
TIMER ON function
Make sure the unit is plugged in.
Press the "timer on"button. The display will show the last setting of the "timer on"
mode. Press the "timer on" button again to start setting the delay time you want to
airco to start working. Every time you press the timer the delay time will change. Max.
delay timer setting is 24 hours.
After setting the timer, it takes about 2 sec. Before the set temperature will be
displayed again.
TIMER OFF function
Press the "timer off"button. The display will show the last setting of the "timer off"
mode. Press the "timer off" button again to start setting the delay time you want the
airco to stop working. Every time you press the timer the delay time will change. Max
64