Domo DO-262A Mode D'emploi page 65

to set delay time is 24 hours. After setting the timer, it takes about 2 sec. Before the set
temperature will be displayed again.
COMBINED TIMER
This setting can be used to let the airco start at a certain time and stop at a different
time.
1. Automatic off-on
a.
b. Press the "timer off" button again and set the desired delay time, you
c.
d. Press the "timer on" button again and set the desired delay time, you
e.
NOTE : make sure that the set "off" time is urlier than the "on" time.
2. Automatic on-off
a.
b. Press the "timer on" button again and set the desired delay time, you
c.
d. Press the "timer off" button agian and set the desired delay time, you
e.
NOTE : make sure the set "on"time is urlier than the set "off" time.
SLEEP function
When pressing the "sleep" button, the selected temperature will be elevated with 1 °C
after 30 min. After another 30 min the temperature will increase with another 1°C. The
airco will maintain this temperature for 7 hours. After this time, the airco will go back
to the original set temperature and the "sleep" function will end.
NOTE : this function can not be selected with the "fan" or "dry" function.
Press the "timer off" buton.
want the airco to stop working.
Press the "timer on" button
want the airco to start working.
Wait until the display shows the set temperature again.
Press the "timer on" button
want the airco to start working.
Press the "timer off" button
want the airco to stop working.
Wait unit the display shows the set temperature again.
65
DO-262A