SOUNDMASTER SCD7800 Mode D'emploi page 22

Snooze
The automatically set alarm function can be switched off for 9 minutes with the "INFO /
SNOOZE" button.
Deactivate the sounding wake up tone
Press the "VOLUME+ / ALARM 1" or "VOLUME- / ALARM 2" button to deactivate the sounding
alarm tone.
Activate / Deactivate the alarm
Press in standby mode repeatedly the "VOLUME+ / ALARM 1" or "VOLUME- / ALARM 2" and
choose "Alarm off.
Press in standby mode repeatedly the "VOLUME+ / ALARM 1" or "VOLUME- / ALARM 2" and
choose the desired wake up source.
The system must be in standby mode in order to set the clock.
1. Press and hold the "PLAY / PAUSE / CLOCK / ENTER" button for approx. 2 seconds.
2. Use the "SKIP + / TUNING +" or "SKIP - / TUNING -" buttons to set the time format "12 /
24hr" and press the "PLAY / PAUSE / CLOCK / ENTER" button to confirm time format. Now
the hour digits start flashing.
3. Use the "SKIP + / TUNING +" or "SKIP - / TUNING -" buttons to set the hours and press the
"PLAY / PAUSE / CLOCK / ENTER" button to confirm. Now the minutes digits flashing.
4. Use the "SKIP + / TUNING +" or "SKIP - / TUNING -" buttons to set the minutes and press
the "PLAY / PAUSE / CLOCK / ENTER" button to confirm. Now the display shows the date.
5. Set in the same way the date.
Note:
Press and hold the "PLAY / PAUSE / CLOCK / ENTER" button during operation order to briefly
display the current time.
To listen to music privately, use headphones with a 3.5mm stereo jack plug and connect them to
the headphones socket on the back of the system. The speakers will then be muted.
SETTING CLOCK AND DATE
HEADPHONE
9
SCD7800 / English Instruction Manual