SOUNDMASTER SCD7800 Mode D'emploi page 20

Playing Cassettes
1. Select the Tape mode with the "STANDBY / FUNCTION" button, until "TAPE" is shown.
2. Press the "STOP/EJECT" button to open the cassette compartment.
3. Insert a recorded audiocassette into the compartment with the tape opening facing upwards
and the side you wish to listen to facing the front (full spool to the right). Then close the
cassette compartment again.
4. Press the "PLAY" button to listen to the tape.
5. With the "STOP/EJECT" button you can stop play-back.
6. Wind the tape forwards or backwards if necessary ( . forward
7. Always press the "STOP/EJECT" key when changing the direction or stopping the tape.
This prevents damage to the machine and the tape.
8. If the "STOP/EJECT" button is pressed again the flap of the cassette compartment opens.
9. In order to interrupt playback briefly, press the "PAUSE" button. Pressing again continues
playback.
This device has been developed in line with the latest technical advances in the USB field. The
wide range of different USB storage devices of all types which are currently on the market,
unfortunately do not allow us to guarantee full compatibility with all USB storage devices. For
this reason, in rare cases there may be problems in playing back files from USB storage
devices. This is not a malfunction of the device.
1. Press repeatedly the "STANDBY / FUNCTION" button, until "USB" is shown in the display.
2. Connect a USB storage device directly into the port. Playback will automatically start after a
few seconds.
The control functions, repeat functions and programmed play are the same as in CD mode.
Note:
•
Always directly connect a USB storage medium to the USB port to prevent any
malfunctions.
•
The USB port is not designed for charging external devices.
CAUTION:
Switch the device to a different operating mode before you remove the USB storage device.
CASSETTE
USB
7
SCD7800 / English Instruction Manual
backward)