Cleaning; Maintenance And Service; Guarantee / Warranty / Liability - Soehnle Professional 3010 Mode D'emploi

3. General Instructions

3.4 Cleaning

Prior to each cleaning, the terminal must be disconnected from the power supply.
Clean the terminal as needed with conventional household cleaning agents. Make sure that no fluids
ingress into the terminal. Then rub off with a dry, soft rag. Never use abrasive or aggressive cleaning
agents for cleaning, as such agents can damage the terminal.

3.5 Maintenance and Service

If you purchased this terminal in a calibrated state, the measuring control was carried out during the
manufacturing process by initial calibration. Additional recurring metrology inspections (reapprovals)
must be performed by the competent approval authorities in accordance with the relevant national
regulations.
The terminal must undergo regular preventive inspections (6 month intervals) Place a known weight
onto the scale and compare the value in the terminal with the test weight. Any discrepancies require
service or calibration.
The terminal may only be opened or repaired by service stations authorized by Soehnle Industrial
Solutions. When the terminal does not operate as intended, the terminal might be damaged.
In this case it is essential to return the terminal to a service station authorized by Soehnle Industrial
Solutions. Only original spare parts must be used for repairs performed by an authorized service
station. The original parts are described in the service documentation with order numbers.

3.6 Guarantee / Warranty / Liability

When a defect in the delivered item is attributable to the manufacturer, the manufacturer is entitled at
its discretion to either remedy the defect or to supply a replacement. Replaced parts become the
manufacturer's property. The statutory regulations apply if the defect remedy or replacement deliveries
fail.
The guarantee period is 24 months and begins on the date of initial purchase. Please retain the invoice
as proof. For service contact your dealer or your Soehnle Industrial Solutions service partner.
No liability is assumed in particular for losses resulting for the following reasons: Unsuited,
inappropriate storage or use, defective assembly and / or startup by the buyer or third parties, normal
wear and tear, modifications or manipulations, deficient or careless treatment, in particular excessive
loads, chemical, electrochemical, electrical influences or moisture, provided these are not attributable
to the manufacturer. The product warranty for the unrestricted overall function of the equipment is null
and void if operational, climatic or other influences result in a significant change of circumstances or
the condition of the material. The warranty for wear parts (e.g. rechargeable batteries) is 6 months.
Please keep the original packaging for any required shipping!
3
33