Publicité
Les langues disponibles
Les langues disponibles
1. Introduction
MANUFACTURER:
Scheppach GmbH
Günzburger Straße 69
D-89335 Ichenhausen
DEAR CUSTOMER,
We hope your new tool brings you much enjoyment
and success.
NOTE:
In accordance with the applicable product liability
laws, the manufacturer of this device assumes no lia-
bility for damage to the device or caused by the device
arising from:
• Improper handling,
• Non-compliance with the operating manual,
• Repairs carried out by third parties, unauthorised
specialists.
• Installing and replacing non-original spare parts,
• Application other than specified,
• Failure of the electrical system in the event of the
electrical regulations and VDE provisions 0100, DIN
57113 / VDE0113 not being observed.
Please consider:
Read through the complete text in the operating man-
ual before installing and commissioning the device.
The operating manual is intended to help the user to
become familiar with the machine and take advantage
of its application possibilities in accordance with the
recommendations.
The operating manual includes important instructions
for safe, proper and economic operation of the device,
for avoiding danger, for minimising repair costs and
downtimes, and for increasing the reliability and ex-
tending the service life of the device.
In addition to the safety instructions in this operating
manual, you must also observe the regulations appli-
cable to the operation of the device in your country.
Keep the operating manual package with the machine
at all times and store it in a plastic cover to protect it
from dirt and moisture. They must be read and care-
fully observed by all operating personnel before start-
ing the work.
The device may only be used by personnel who have
been trained to use it and who have been instructed
with respect to the associated hazards. The required
minimum age must be observed.
In addition to the safety instructions in this operating
manual and the separate regulations of your country,
the generally recognised technical rules relating to the
operation of such machines must also be observed.
We accept no liability for accidents or damage that
occur due to a failure to observe this manual and the
safety instructions.
34 | GB
2. Device description
1.
Steering wheel
2.
Driver's seat
3.
Cup holder
4.
Cutting height setting
5.
Rear wheels
6.
Mowing unit
7.
Wheels, front
8.
Brake pedal
9.
LED headlights
10. Forward pedal
11. Side discharge
12. Seat adjustment
13. Operating panel
14. Locking brake
15. Reverse pedal
16. USB sockets
17. Mowing unit on/off
18. Charge status indicator
19. Operating hours indicator
20. Reverse mowing option on/off
21. LED headlights on/off
22. Cruise control on/off
23. Ignition lock
24. Side discharge locking pin
25a. Power supply cable
25b. Transformer
25c. Charging plug
25d. Battery charger
26. Battery charging socket
3. Scope of delivery (fig. 2)
• Driver's seat (2)
• Charge station (25)
• Battery-powered ride-on lawnmower (26)
• 2x M8x20 screws (27)
• 4x M8 nuts (28)
• 1x M8x36 screw (29)
• 2x ignition keys (30)
• Steering wheel mounting (31)
• Plastic sleeve (32)
• Spring washer (33)
• 2x plastic washers (34)
• Steering wheel (1)
• Steering wheel cover (35)
• Steering rod cover (36)
• Steering rod (37)
• Mulching insert (38)
• Allen key, 5 mm (39)
• Double open-ended spanner 13-15 mm (40)
• Double open-ended spanner 10-13 mm (41)
www.scheppach.com
Publicité
