Publicité
Les langues disponibles
Les langues disponibles
OPERATING INSTRUCTIONS
USING THE REMOTE CONTROLLER BUTTONS
Model / Modèle :
R15B
Model / Modèle :
R15B
Model / Modèle :
R15B
SLEEP OPERATION
•
In this mode, the selected temperature will increase (when in cooling mode) by 1°C (2°F)
one half-hour after sleep mode has been selected.
•
The temperature will increase by another 1°C (2°F) after an additional half-hour.
•
This new temperature will be maintained for 6 hours before returning to the originally
selected temperature. This ends the Sleep mode and the unit will continue to operate as
originally programmed.
•
The Sleep mode program can be cancelled at any time during operation by pressing the
1
Sleep button again.
-----------------------------------------------------------------------------------------------------------------------
TIMER OPERATION
Pressing the TIMER button can set the Auto-start and Auto-stop time of the unit.
NOTE:
•
To set Auto-start time, the unit must be in the OFF position.
•
To set Auto-stop time, the unit must be in the ON position.
1
To set the Auto-start time
1. Push the TIMER button when the unit is off; only the Auto-start feature can be set.
2. Keep pressing the TIMER button. Each time pressed, will increase the selected time
by 0.5 hour increments. When the selected time has added up to 10 hours, each time
pressed will increase the selected time by 1 hour increments, up to 24 hours.
3. The time can be set in the range of 0-24 hours.
4. After the desired time has been selected, wait for about 10 seconds, until the setting
temperature reappears in the display window of the air conditioner. This indicates that
the program has been set.
-----------------------------------------------------------------------------------------------------------------------
TIMER OPERATION
To set the Auto-stop time
1. Push the TIMER button when the unit is operational; only the Auto-stop feature can be
set.
2. Keep pressing the TIMER button. Each time pressed will increase the selected time by 1
hour increments, up to 24 hours.
1
3. The time can be set in a range of 0-24 hours.
4. After the desired time has been selected, wait for about 10 seconds, until the setting
temperature reappears in the display window of the air conditioner. This indicates that
the program has been set.
NOTE:
To cancel the TIMER setting, push the TIMER button until "0 hours" is displayed on the LCD
window of the air conditioner.
-----------------------------------------------------------------------------------------------------------------------
9
Publicité
