Comelit 3070 Serie Manuel Technique page 29

2.2.1. ENTER
PROCEDURE DISPLAY INFO
Access configuration (see
MAIN
page 23).
ACCESS CONTROL
Select the
ACCESS CONTROL
ACCESS CONTROL /
PASSWORD
PASSWORD / ENTER
using the key .
PASSWORD
ENTER
Enter the desired
password code.
PASSWORD
VALUE: _ _ _ _ _ _
PASSWORD
VALUE: * * * * * *
Press the key
PARAMETER
to confirm the value CHANGED
of the parameter.
To exit the menu,
PASSWORD ALREADY
press .
IN MEMORY
Exit configuration (see
page 23).
2.2.2. DELETE
PROCEDURE DISPLAY INFO
Access configuration (see
ACCESS CONTROL
page 23).
PASSWORD
Select the menu
ACCESS CONTROL /
PASSWORD
PASSWORD / DELETE
DELETE
using the key .
DESCRIPTION
The menus are scrolled
through automatically
every 2 seconds.
The password must be
at least 4 digits long.
If the password is 4-5
characters long, it will
self-complete: the first
digits will be zero (e.g.:
001234 / 012345).
If entry is successful.
Up to 1000 password
codes can be entered.
or:
If the password has
already been entered.
DESCRIPTION
The menus are scrolled
through automatically
every 2 seconds.
Enter the desired
PASSWORD
password code.
VALUE: _ _ _ _ _ _
PASSWORD
VALUE: * * * * * *
Press the key
PARAMETER
to confirm deletion. CHANGED
To exit the menu,
press .
WRONG
PASSWORD
Exit configuration (see
page 23).
2.2.3. DELETE ALL
PROCEDURE DISPLAY INFO
Access configuration (see
page 23).
ACCESS CONTROL
Select the menu
PASSWORD
ACCESS CONTROL /
PASSWORD
PASSWORD / DELETE
DELETE ALL
ALL
using the key .
DELETE
ALL PASSWORD?
Press the key
to confirm deletion.
PLEASE WAIT
PARAMETER
CHANGED
Exit configuration (see
page 23).
Enter the exact
password (the first two
digits, if omitted, will be
entered as zero).
If entry is successful.
or:
If the password is not
recognised.
DESCRIPTION
The menus are scrolled
through automatically
every 2 seconds.
Press the key to
cancel
the procedure.
29