Comelit 3070 Serie Manuel Technique page 26

Select the call mode
CALL MODE
by entering the
_ _ _ 1
corresponding number:
0 = SIMPLEBUS
1 = SIMPLEBUS TOP
2 = VIP
CALL MODE
SIMPLEBUS TOP
Press the key
to confirm the value
PLEASE WAIT
of the parameter.
CALL MODE
STANDARD
Select the call mode
CALL MODE
by entering the
_ _ _ 1
corresponding number:
0 = STANDARD
1 = INDIRECT CODE
[NOT VIP]
CALL MODE
INDIRECT CODE
Press the key
PARAMETER
to confirm the value CHANGED
of the parameter.
ERROR
ERROR
DEFAULT SETTINGS
Exit configuration (see
page 23).
26
EXAMPLE: setting the
system as SIMPLEBUS
TOP
2 sec
If the change was
successful the speaker
will emit a confirmation
tone.
The current value of
the parameter appears
on screen (Standard or
indirect code).
EXAMPLE: setting the
call mode as INDIRECT
CODE.
2 sec
If entry is successful.
If entry does not fall
within the limits.
If the directory and
speaker are configured
differently and the
directory already
contains data,
the default values must
be restored.
1.1.4. RS485 ADDRESS [NOT VIP]
The value of this parameter is used only in special applications.
PROCEDURE DISPLAY INFO
Access configuration (see
MAIN
page 23).
SETTINGS
Select the
SETTINGS /
SETTINGS
SYSTEM PARAM. /
SYSTEM PARAM.
ADDRESS RS485 using
SYSTEM PARAM.
the key.
ADDRESS RS485
ADDRESS RS485
0000
Enter the RS485 address:
ADDRESS RS485
from 0 to 255.
_ 250
RS485
0250
PARAMETER
Press the key to
CHANGED
confirm the value
of the parameter.
ERROR
Exit configuration (see
page 23).
DESCRIPTION
The menus are scrolled
through automatically
every 2 seconds.
The current value of the
parameter appears on
screen.
EXAMPLE: Entering
address 250.
2 sec.
If entry is successful.
If entry does not fall
within the limits.