Velleman SG21006 Notice D'emploi page 9

Example: Zones 01 and 03 must remain deactivated when the system is in GUARD mode (HOME).
Submenu 3 - Call
Tel
This menu is used to program the telephone numbers to dial when the alarm is triggered. The
number must consist of minimum 3 and maximum 13 digits. The message "PATh TROUBLE" will be
displayed and a sound will be heard when the system has a faulty connection.
Tele1: Number of the central when there is a connection. Tele2 ~ 4: Numbers used for vocal
messages.
Enter the value "o" when the telephone number does not need to be dialled.
Dial
Menu used to program the number of calls. The default value is 3 times. Enter a number and confirm
with the # button.
Vibrant ring
Menu used to program the number of rings before the telephone (connected to the central unit) will
switch to the "Remotely Controlling the Central Unit" function (see below). The default value is 8
rings. Enter a number from 01 to 99 and confirm with the # button.
HAM06WS_v2
0 1
Set arm zone NO
01
0 3
Set arm zone NO
03
*
1.Alert 2.Home
3.Call 4.Del home
1.Tel 2.dial
3.Vibrant ring 4.bypass
1.Tele1 2.tele2
3.Tele3 4.Tele4
Input tel NO.
**********
Set dial times
**
Input ring times
**
9
#
#
VELLEMAN