Velleman SG21006 Notice D'emploi page 12

7. Door or Window Sensor
Install the 2 sensors as illustrated.
Make sure to align the triangles on both sensors
and to keep the spacing between them less than
5mm.
Open the battery compartment and install the
included 12V battery. Assign the sensor with a unique address with the DIP switches. Close the sensor and
program it into the central unit. The red LED on the sensor will light at each door opening.
Remark: The transmitter will emit a sound when opening the battery compartment.
8. Technical Specifications
Central Unit
Power Supply
Standby Power
Working Frequency
Remote Control Range
Static Current
Alarm Volume
PIR Sensor
Detection Angle
Detection Distance
Power Supply
Static Current
4-Key Remote Control
Power Supply
Panic Button
Power Supply
Door Contact
Power Supply
Siren
Power Supply
Current
For more info concerning this product, please visit our website www.velleman.eu.
The information in this manual is subject to change without prior notice.
HAM06WS_v2
12VDC (incl.)
12VDC (not incl.)
433Mhz
± 30m
150mA
> 90dB
110°
max. 12m
9VDC (order code 6LR61, not incl.)
30µA
3VDC (order code CR2032 button cell, incl.)
12VDC (order code GP23GA, incl.)
12VDC (order code GP23GA, incl.)
12VDC
< 800mA
12 VELLEMAN