Publicité
Les langues disponibles
Les langues disponibles
Submenu 4 – Del home
Press button 4 (del home) in the SETUP menu to erase all the zones assigned to the HOME mode (or
GUARD st). The previous menu will be displayed next.
"Study" Menu
This menu is used to program all the remote controls and wireless sensors into the system.
Submenu 1 – Remote
Possibility to program up to 4 different remote controls.
Select a remote by pressing a number (1 ~ 4) and confirm with the # button. The central unit will display
following message:
Next, press any button on the remote control. The central unit will emit a short beep and display the
previous menu. The remote control has bee saved into the system. Repeat previous steps to save more
remotes.
Submenu 2 – Arm zone
This menu will be used to program up to 8 wireless sensors and to assign each of them to a particular
zone.
Select your zone (armzone 05 up to armzone 12). Zones 1 through 4 are reserved for wired sensors
(terminal 5 ~ terminal 8 onto the PCB). Confirm with the # button. Following message will be displayed:
Next, activate the sensor. The central will emit a short beep and display the previous menu. The sensor
has been assigned to its zone. Repeat previous steps to assign more sensors.
Submenu 3 – Del
The Del menu is used to erase all saved remote controls and sensors.
g. Alarm Messages through the Telephone
The central unit will dial the programmed telephone numbers when the alarm is triggered. Short beeps will be
heard (the number depends on the number programmed in "dial times"). The user will hear the vocal message
upon answering the telephone. Press the # button on the telephone to make the central unit stop calling.
HAM06WS_v2
1.remote
2.arm zone
3.del
1.remote
*
be studying
Set arm zone NO.
**
be studying
10
VELLEMAN
Publicité
