Publicité
Les langues disponibles
Les langues disponibles
4. Connecting Cables and Power Cord
4-1. Connecting the Interface Cable
Note: Before connecting/disconnecting the interface cable, make sure that
power to the printer and all the devices connected to the printer is
turned off.
Also make sure the power cable plug is disconnected from the
AC outlet.
(1) Connect the interface cable to the connector on the rear panel of the printer.
(2) In the case of a serial interface, tighten the connector screws. In the case of a
parallel interface, fasten the connector clasps.
O F
F
O N
O F
F
O N
O N
Parallel interface cable
– 6 –
Serial interface cable
Publicité
