SOLIS PERFECT BLENDER 8328 Mode D'emploi page 71

6. Do not leave the power cable hanging over table edges to
prevent the appliance from being pulled down. Make sure
that neither the appliance nor the power cord or the plug
come into contact with hot surfaces like e.g. a stove top or
a heater.
7. Install the power cord so that nobody can trip over it. Keep
clear of pointed objects.
8. Always fully unwind the power cord before connecting the
power plug to the power socket.
9. Never carry the appliance by the power cord and do not place
anything on the power cord. Never pull on the power cord
to disconnect the appliance from the power mains. Only pull
on the plug.
10. We recommend that you do not use an extension cable with
this appliance. Do not place the appliance directly underneath
a power socket.
11. Keep the appliance away from hot gas, hot ovens and other
heat-emitting appliances or heat sources. Never use the appli-
ance on a hot or wet surface. Never place the appliance near
moisture, heat and naked flames. Keep the appliance away
from moving parts or appliances.
12. The appliance has to be placed on a solid, level, dry, stable
and moisture resistant work surface. The appliance might
vibrate and shift during use. Therefore, never operate the
blender near the edge of table.
13. Never use the appliance in a cupboard or store it in a cup-
board while the power plug is plugged in. Risk of fire!
14. Keep a minimum safety distance of 20 cm between the appli-
ance and walls, curtains or other materials and objects and
make sure that the air around the appliance can circulate
freely.
GB
71