Publicité
Les langues disponibles
Les langues disponibles
OPERATION
Brake lever –must be held down to the handle to start the engine. Release to stop the engine.
Starter handle - used for starting engine.
Drive control lever - used to engage
Power-propelled forward motion of lawn mower.
Range of application
①.Cutting up and depositing the grass on the lawn
.Cutting up and collected in the grass catcher
②
.Cutting up and ejecting backwards
③
.Cutting up and ejecting sidewards.
④
Mulching
1. Installation and removal of the accessories must always be take place with switched off engine.
2. Please make sure the stability of the attached mulching accessories after installing.
3. For mulching plate, you only allowed use the accessories from original factory
4. Always avoid clearing away an excessive quantity grass so that the mower mechanism and the engine
are overloaded. It will helpful to pass excessive grass if reduce the speed of self-propelled.
Assembly
Put the baffle plate and raises (1), aim at the (2) round hole underside, fax up the autolocking hook
engage
Disassembly
Press the (3) tightly by thumb in the center, then loose and deflect direction take down the mulching plate.
Hang up the grass catcher
Raise the baffle plate and hang up the grass catcher
in the illustration shown.
56
Publicité
