INSTALLATTACHMENTS
Your lawn mower was shipped ready to be used as rear bag
mower.
SET UP YOUR MOW ER
IMPORTANT: Unfold handle carefully so as not to pinch or
damage control cables.
1. Raise handles until lower handle section locks into place in
mowing position.
2. Remove protective padding, raise upper handle section into
place on lower andle and tighten both handle knobs.
3.Remove handle padding holding operator presence control bar
to upper handle.
Push handle
Drive lever
Instruction for grass bag assembly
1. Put out the grass box and metal bracket from the packing box
2. Put the metal bracket into the grass box, keep the handle outside.
3. Fix the plastic jacket in the metal bracket.
Brake lever
The sensitivity of clutch lies on
tightness-scale of nut.
55