Publicité
STARTING SCREEN
When switching on, the screen will display the memory number
followed by the power supply voltage. When operating the trim
lever or the rate lever, the screen will automatically change.
LCD ALL SCREEEN INDICATION
battery voltage
CH which is displayed on the LED
ATV
steering rate
„|Снтг | NOR REV
STRATE
Um
исто К ( Гу [Л
at: LV
each directions of displayed number
MEMORY CHANGE
trim
This product can memorize set up data for up to 10 cars.
To change the set up memory, follow the procedure below:
1)Push the memory button for more than 2 seconds, the memory
change screen will be indicated with an alarm sound.
2)While the memory change screen is indicated, push the button
to override the set up in the memory.
3)The new memory set up is confirmed automatically after a few
seconds.
FUNCTIONS OF STEERING TRIM LEVER
Trim function
Leave the steering wheel in the neutral position and adjust the trim
lever in order to set up desired neutral position on the servo. As
the position changes, you will hear 2 clicking sounds which signify
each movement.
Right and left angle adjustment function(steering ATV)
Hold the wheel to full lock right and operate the ATV lever.
Repeat this for full left lock.
This function ensures that the steering linkage does not lock.
rotating direction of displayed CH
memory number
power supply voltage/set up numbers
MEMORY
current memory number
NOR
moving direction and amount of trim
CHI
NOR
жа e
angle of each directions
Publicité
