Rointe SINTRA WI-FI Manuel D'installation Et D'utilisation page 17

If you press the button
minutes).
The LEDs will work as a countdown, turning off as the time elapses. Once the time has
elapsed, the product will automatically return to the previous mode or will switch off if it
was already in stand-by.
The MAX POWER mode can be stopped at any time by a short press on the button
towel rail will return to its previous state.
5.6. WI-FI PAIRING
To pair the device you must first create a zone in the application. Once inside this zone,
press the icon + to start the pairing wizard. If you need more information, you can consult
the complete installation manual from the following QR code:
To enter pairing mode, you must press and hold the On/Off keys simultaneously
for 5 seconds. and Maximum Power
rebooted and LED 7 will be shown flashing fast to indicate that it is in Pairing
Mode. Temperature LEDs 1 to 6 will display the Wi-Fi network name (SSID).
6. ADVANCED FEATURES
Advanced functionalities are those that are controlled only from applications.
6.1. OPEN WINDOWS FUNCTION
The Rointe towel rail includes the OPEN WINDOWS function activated from
the factory. This function is activated when the temperature sensor detects a
sudden drop in the ambient temperature of at least 4ºC in a period of 30 minutes.
When the product detects this drop, it activates the WINDOWS OPEN function for two
hours. When this function is active, the product switches to ANTI-FREEZE mode at 7ºC.
When the Windows Open function is operating, because the conditions are met, LED 1
will be displayed with a soft blinking if there is no consumption. If there is consumption
(less than 7ºC in the room), LED 1 should flash 1 time between each soft flashing cycle.
SINTRA WI-FI ELECTRIC TOWEL RAIL
7 times, you will return to the starting point (activation for 15
. All LEDs will turn off when the device is
EN
. The
17