Publicité
Les langues disponibles
Les langues disponibles
Section
SIRIUS Satellite Radio tuner
12
Listening to SIRIUS Satellite
Radio
5 5 5
This unit can control a SIRIUS Satellite Radio
tuner (sold separately).
When the SIRIUS tuner is used together with
this unit, some operations differ slightly from
those described in the SIRIUS operation man-
ual. This manual provides information on
these points. For all other information on
using the SIRIUS tuner, please refer to the SIR-
IUS operation manual.
With this unit, you can operate one addi-
tional function: SIRIUS channel direct se-
lection. Refer to Selecting a SIRIUS channel
directly on this page.
1 SIRIUS band indicator
Shows the SIRIUS band which has been
selected.
2 SIRIUS preset number indicator
Shows what SIRIUS preset has been
selected.
3 SIRIUS channel select setting indicator
Shows what channel select setting has
been selected. CH is displayed when
Channel number is selected, and CAT is
displayed when Category is selected.
4 SIRIUS channel number indicator
Shows to which SIRIUS channel number
the tuner is tuned.
5 SIRIUS channel name
Shows the channel name of broadcast
channel.
70
En
1
Press SOURCE until you see SIRIUS displayed.
2
Press BAND repeatedly until the desired SIR-
1 1 1 1
2 2 2 2
3 3 3 3
4 4 4 4
IUS band is displayed, SR-1, SR-2 or SR-3.
3
MULTI-CONTROL left or right.
The channels move up or down step by step.
Channels that cannot currently be selected
are skipped, and the next channel is selected.
right, you can increase or decrease channel num-
ber continuously.
channel category. (Refer to Selecting a channel in
the channel category on page 72.)
It may take a few seconds before you can hear
anything while this unit acquires and processes
the satellite signal when you change the source
to SIRIUS tuner or select a channel.
Selecting a SIRIUS channel
directly
You can select a SIRIUS channel directly by
entering the desired channel number.
1
CHANNEL INPUT appears in the display.
2
the desired channel number.
the remote control.
3
press DIRECT on the remote control.
The entered SIRIUS channel is selected.
Black plate (70,1)
Press SOURCE to select SIRIUS.
Press BAND to select a SIRIUS band.
To perform tuning, push
If you push and hold MULTI-CONTROL left or
You can also perform tuning from a desired
Note
Press DIRECT on the remote control.
Use 0 9 on the remote control to input
To cancel the input numbers, press CLEAR on
While the input number is displayed,
<CRD4096-A/N>70
Publicité
