Pioneer PREMIER SUPER TUNER III D DEH-P980BT Mode D'emploi page 58

Section
Multi-CD Player
09
If you do not operate the function within about
30 seconds, the display is automatically re-
turned to the playback display.
Repeating play
There are three repeat play ranges for the
multi-CD player: Multi-CD repeat (multi-CD
player repeat), Track repeat (one-track repeat)
and Disc repeat (disc repeat).
1 Use MULTI-CONTROL to select
Play mode in the function menu.
Play mode appears in the display.
2 Press MULTI-CONTROL to select the re-
peat range.
Press MULTI-CONTROL repeatedly until the
desired repeat range appears in the display.
Multi-CD repeat Repeat all discs in the
multi-CD player
Track repeat Repeat just the current
track
Disc repeat Repeat the current disc
Notes
If you select other discs during repeat play,
the repeat play range changes to
Multi-CD repeat.
If you perform track search or fast forward/re-
verse during Track repeat, the repeat play
range changes to Disc repeat.
Playing tracks in random order
Random play lets you play back tracks in ran-
dom order within the repeat range,
Multi-CD repeat and Disc repeat.
1 Select the repeat range.
Refer to Repeating play on this page.
58
En
Black plate (58,1)
2 Use MULTI-CONTROL to select
Random mode in the function menu.
Random mode appears in the display.
3 Press MULTI-CONTROL to turn random
play on.
Tracks will play in a random order within the
previously selected Multi-CD repeat or
Disc repeat ranges.
To turn random play off, press
MULTI-CONTROL again.
Scanning CDs and tracks
While you are using Disc repeat, the begin-
ning of each track on the selected disc plays
for about 10 seconds. When you are using
Multi-CD repeat, the beginning of the first
track of each disc is played for about 10 sec-
onds.
1 Select the repeat range.
Refer to Repeating play on this page.
2 Use MULTI-CONTROL to select
Scan mode in the function menu.
Scan mode appears in the display.
3 Press MULTI-CONTROL to turn scan play
on.
The first 10 seconds of each track of the cur-
rent disc (or the first track of each disc) is
played.
4 When you find the desired track (or
disc) press MULTI-CONTROL to turn scan
play off.
The track (or disc) will continue to play.
If the display has automatically returned to
the playback display, select Scan mode again by
using MULTI-CONTROL.
<CRD4096-A/N>58