English
17
14 Place a container under the filter holder.
15 Set the power button on "I" to switch on the machine and turn the selection knob to the coffee
position.
16 Dispense water until the water tank is empty. Move the selection knob back to the standby
position.
17 Fill the tank with fresh water up to the maximum level (MAX) graduation mark.
18 Place a large container under the steam wand. Turn the hot water/steam knob counter-clockwise.
19 Turn the selection knob to the coffee position and let the machine dispense water until the water
tank is empty.
20 Move the selection knob back to the standby position.
21 Turn the hot water/steam knob clockwise.
22 Repeat steps 13 to 21 described above.
23 Turn the filter holder from right to left to remove it from the coffee brewing unit and rinse it using
fresh water.
24 Fill the tank with fresh water up to the maximum level (MAX) graduation mark.
25 Insert the classic pannarello into the steam wand once again.
The machine is ready for use.