Gaggia VIVA CHIC Mode D'emploi page 14

7 Insert the filter holder into the coffee brew unit from the bottom (fig. 10).
8 Turn the filter holder from left to right until it locks in place. Release the handle, that will turn
slightly leftwards (fig.11). Once released, the handle shall be perpendicular to the machine or slightly
shifted rightwards (fig. 29).
9 Place a container under the filter holder (fig. 12).
10 Turn the selection knob up to the coffee position (fig. 7).
-
Let the machine dispense water until the water tank is empty.
Note: To empty the container when full, turn the selection knob to stand-by (fig. 8) to stop
dispensing.
11 Once the water tank is empty, move the selection knob back to the standby position (fig. 8).
12 Fill the water tank with fresh water up to the MAX level graduation mark and wait until the
"machine ready" indicator light comes on.
13 Turn the filter holder from right to left to remove it from the coffee brewing unit and rinse it using
fresh water (fig. 13).
The machine is ready for use.
How to use the machine
Warning: Insert the filter holder correctly into its seat to prevent it from releasing. Otherwise, this
may result in a risk of burns.
Brewing coffee using pre-ground coffee
Warning: In order to avoid the risk of burns, do not turn the pressurized filter holder to remove it
while dispensing is in progress.
1 Pre-heat the pressurized filter holder before brewing coffee for the first time.
2 Insert the filter holder into the coffee brew unit from the bottom (fig. 10).
3 Turn the filter holder from left to right until it locks in place. Release the handle, that will turn
slightly leftwards (fig.11). Once released, the handle shall be perpendicular to the machine or slightly
shifted rightwards (fig. 29).
4 Turn the selection knob to the coffee position (fig. 7) until water flows out from the coffee brewing
spouts.
5 Let the machine dispense one cup of water. Turn the selection knob to the standby position (fig. 8)
to stop dispensing.
6 Turn the filter holder from right to left to remove it from the machine and pour the residual water
(fig. 14).
Note: remove any coffee residue from the edge of the filter holder.
7 Ensure that the the pre-ground coffee filter is inserted into the pressurized filter holder (fig.16).
When using the machine for the first time, it comes with the pre-ground coffee filter already inserted.
8 Use the measuring scoop found under the water tank lid, to add pre-ground coffee into the
pressurized filter holder.
- To dispense one cup of coffee, add 1-1.5 measuring scoops of pre-ground coffee.
- To dispense two cups of coffee, add 2 measuring scoops of pre-ground coffee (fig. 15).
9 Insert the filter holder into the coffee brew unit from the bottom (fig. 10).
English
13