HoMedics HCM-WRP590H Manuel D'instructions page 4

INSTRUCTIONS FOR USE
Fig. 1
1. Insert USB cord into the port on the rechargeable battery pack. The USB cord is located in the fabric
pouch on the inside lining of the cape (Fig. 1).
2. Touch the power button on the battery pack once to turn the battery pack on. The blue indicator
lights will illuminate to indicate battery level.
3. Place unit around your shoulders (Fig. 2).
4. To activate the massage action, press the vibration
massage will activate on the lowest setting. To increase the massage intensity, press the vibration
button again. To turn the vibration massage off, press the vibration
5. To activate heat function, press the heat
again for low heat (yellow). To turn off the heat, press the heat
NOTE: Heat and vibration can be used independently or combined.
The battery pack should arrive with a full charge. If the battery is depleted, you may plug the provided
adapter cord into the port on the battery pack and plug the other end into a USB adapter or outlet. The
blue indicator lights will illuminate in sequence to indicate active charging. The product will be fully
charged after approximately 3 hours of charge time. With a full charge, the battery pack will provide
power for up to 2 hours.
Fig. 2
button on the control pad once for high heat (red). Press
Fig. 3
button on the control pad. The vibration
button a third time (Fig. 3).
4
button a third time.