Yamaha CD-S303RKBL Mode D'emploi page 6

INTRODUCTION
Front panel
1
(Power)
Press to turn the power on/off.
y
• The power indicator above lights up when this unit is turned on.
• Playback starts automatically if the power is turned on while a
disc is set in the disc tray.
2 Power indicator
Lights up as follows:
ON: Bright
OFF: Off
3 iPod/USB port
Connect your iPod or USB device. See page 6 for details.
4 iPod/USB indicator
Off: CD mode is selected.
Orange: Connection ready.
Green: iPod/USB is connected and playable files have
been detected (playback ready).
5 CD/USB
Swithes between CD mode and iPod/USB mode (see
page 6).
y
When the iPod/USB indicator is not lit, this unit is in the CD
mode.
6 PURE DIRECT
Turns on or off the PURE DIRECT mode to improve
audio quality.
y
• The PURE DIRECT indicator lights up.
• The digital output is turned off.
• The front panel display is turned off during playback and only
the minimum required indicators and messages are displayed
during in the operation.
2
En
CONTROLS AND FUNCTIONS
Note
Connect using the ANALOG OUT terminals when you use
PURE DIRECT mode (refer to page 3).
7 Disc tray
Loads a disc.
8
(Open/Close)
Opens or closes the disc tray.
9 Remote control sensor
Receives signals from the remote control.
0
/ (Skip/Search backward),
/ (Skip/Search forward)
/ : Skips to the next track.
/ : Skips back to the beginning of the current
track.
/ (twice): Skips to the previous track.
Press and hold /
backward/forward.
A
(Play)
Starts playback.
B
(Pause)
Pauses playback. Press
C
(Stop)
Stops playback.
or / to search
or to resume playback.