NOTE:
If your model does not have any water softener, you may skip this section.
Water Softener
The hardness of the water varies from place to place. If hard water is used in thedishwasher,
deposits will form on the dishes and utensils.
The appliance is equipped with a special softener that uses a salt containerspecifically
designed to eliminate lime and minerals from the water.
Adjusting the rinse aid reservoir
To achieve a better drying performance with limited rinse aid, the dishwasher is
designed to adjust the consumption by user. Follow the below steps.
1.
Open the door, power on the dishwasher by plugging in;
2.
Within 60 seconds after step 1, press the Program button more than 5
seconds, and then press the Delay button to enter the set model,the rinse
aid indication blinks as 1Hz frequency.
3.
Press the Program button to select the proper set according to your
using habits, the sets will change in the following sequence:
D1->D2->D3->D4->D5->D1. The higher the number, the more rinse aid the
dishwasher uses.
4.
Without operation in 5 seconds or press the Power button to exit the set model,
the set success.
Preparing And Loading Dishes
Consider buying utensils which are identified as dishwasher-proof.
For particular items, select a program with the lowest possible temperature.
To prevent damage, do not take glass and cutlery out of the dishwasher
immediately after the program has ended.
For washing the following cutlery/dishes
Are not suitable
Cutlery with wooden, horn china or mother-of-pearl handles
Plastic items that are not heat resistant
Older cutlery with glued parts that are not temperature resistant
Bonded cutlery items or dishes
Pewter or cooper items
Crystal glass
Steel items subject to rusting
Wooden platters
Items made from synthetic fibres
Are of limited suitability
Some types of glasses can become dull after a large number of washes
Silver and aluminum parts have a tendency to discolour during washing
Glazed patterns may fade if machine washed frequently
17