PNI Safe House PG600 Manuel Utilisateur page 9

You can edit the name of the added sensor (up to 24 characters) by clicking on the pencil
icon.
2. Method # 2: Adding through the buttons on the central unit
• Press the RESET key on the central unit. The central unit will light up.
• Activate the sensor. For example, if it is a motion sensor, move through it or if it is a
magnetic contact, remove the two parts from each other.
• The central unit will blink 3 times.
• Now the respective sensor has been added.
INSTALL THE CENTRAL UNIT
Move the bracket of the central unit to
it to the wall with screws. Install the siren body on the bracket and rotate it to
direction.
(disarmed) direction, remove the bracket and fix
(armed)
9