Beurer BF 410 Mode D'emploi page 18

5. Device description
Overview
1. Electrodes
2. Down button
3. Set button
4. Up button
5. Display
6. Initial use
Inserting the batteries
Remove the batteries from the protective packaging and insert the batteries into the scale (rear of the
scale) ensuring that the battery polarity is correct. If the scale does not function, remove the batteries
completely and reinsert them.
Changing the weight unit
When supplied to the customer, the scale is set to weigh in "kg". Switch on the scale by briefly applying
pressure to the standing surface with your foot (approx. 1-2 seconds). Wait until "
display. To the rear of the scale, there is a button where you can select "pound" and "stones" (lb, st).
Positioning the scale
Place the scale on an even, hard surface; a hard surface is crucial for achieving accurate
measurements.
7. Entering user data
To calculate your body fat percentage and additional body values, you must save the
personal user data.
The scale has 10 user memory spaces which allow you and members of your family to save and access
personal settings, for example.
• Place the scale on an even hard surface; a hard surface is crucial for achieving accurate meas-
urements.
• Switch on the scale by briefly applying pressure to the standing surface with your foot (approx. 1-2 sec-
onds). Wait until " kg" appears in the display.
• Start configuring the settings by pressing the
• Press the / button to select the desired memory space and confirm by pressing the
• You can now implement the following settings:
User data Set values
Users/persons P-1 to P-10
Height 100 to 220 cm (3' 3.5" to 7' 2.5")
Age 10 to 100 years
Gender Male ( ), female ( )
Activity level 1 to 5
2 3 4
1
button. The first memory space flashes in the display.
17
5
kg" appears in the
button.