Publicité
Les langues disponibles
Les langues disponibles
PARTS SUPPLIED IN
INSTALLATION PACKAGE:
• Drain hose extension
• Hose Clamp
• 2 mounting brackets for wood countertop or side
cabinets
• Toekick Insulation
• 6 Phillips-Head screws to secure dishwasher to
underside of countertop or to side cabinets
• Literature, samples and/or coupons
MATERIALS YOU WILL NEED:
• UL-listed wire nuts (3)
• Thread Seal Tape
• 90° elbow (3/4" hose internal thread on one end,
opposite end sized to fit water supply)
Materials For New Installations Only:
• Air gap for drain hose, if required
• Waste tee for house plumbing, if applicable
• Electrical cable or Power Cord Kit WX09X70910 (5' 4"
long) or WX09X70911 (7' 9" long) depending on your
installation.
• Screw-type hose clamp(s)
• Strain relief for electrical connection
• Hand shut-off valve (recommended)
• Hot water line–3/8" minimum, copper tubing
(including ferrule, compression nut) or Monogram
Part # WX28X326, flexible braided hose.
TOOLS YOU WILL NEED:
• Phillips-head screwdriver
• 1/4" and 5/16" nutdriver
• T25 torque driver
• 6" adjustable wrench
• Gloves
• Safety glasses
• Flashlight
• Bucket to catch water
when flushing the line
• Level
• Measuring tape
• Carpenter's square
For New Installations Only:
• Tubing cutter
• Drill and appropriate bits
• Hole saw set
Installation Preparation
Phillips-Head
1/4" and 5/16"
Screwdriver
Nutdriver
Safety Glasses
Flashlight
Tubing Cutter
Drain Hose
Extension
Toekick Insulation
Wire Nuts (3)
Thread Seal
Waste Tee
Air Gap
Hand
Shut-Off
Strain Relief
Valve
T25 Torque
Driver
Bucket
Drill and Bits
3
Hose Clamp
Mounting Brackets
Phillips-Head
Screws
90° Elbow
Tape
Electrical Cable
Hose Clamp(s)
(or Power Cord,
if applicable)
Hot Water Line,
Ferrule and
Compression Nut
6" Adjustable
Wrench
Level
Measuring Tape
Hole Saw Set
Literature
Gloves
Carpenter's
Square
Publicité
