Fresh 'N Rebel 1RB6000CC v1 001 Manuel page 3

READY TO ROCK? HERE IS HOW!
1. Charge the speaker with the Micro USB cable.
The battery capacity LED will light up red when the
speaker is charging. The LED turns off when the
speaker is fully charged.
3. Press the Bluetooth button.
Press the Bluetooth button once to activate Bluetooth.
TURN ON THE DOUBLE FUN MODE
Before you start, deactivate Bluetooth on your phone/laptop/tablet. Make sure both speakers are turned off.
1. Turn on the first speaker
You will find the on/off button at the side. Turn on the first speaker.
2. Turn on the second speaker
You will find the on/off button at the side. Turn on the second speaker.
3. Prepare the first speaker for pairing
Now you'll need to setup the first speaker to pair with the second speaker. Press the Bluetooth button at the side once (short press).
4. Pairing the second speaker
Press the Bluetooth button on the second speaker twice (short presses), you will hear a "bleep" confirming that both speakers have been
paired correctly.
5. Turn on the Bluetooth on your phone/laptop/tablet
Activate Bluetooth and select the speaker from the list of available devices. You'll hear a beep when you're connected.
NOW LISTEN IN "DOUBLE FUN MODE"!
2. Turn the speaker on.
At the side of the speaker, you will find the on/off
button. Turn on the speaker.
4. Is the Bluetooth on your phone on?
Activate Bluetooth and select the speaker from the list
of available devices. You'll hear a "bleep" when you're
connected.
+
Speaker (1) Speaker (2)
Left Right
EN