For proper installation and best possible fit, please read all instructions BEFORE you begin.
For technical assistance or to obtain missing parts, please call Customer Relations at 1-800-328-2438.
Important Safety Information
• CAUTION - Before driving, ensure that the vent visor is properly secured to vehicle.
• Do not use automatic "brush-style" car washes.
• Do not use cleaning solvents of any kind.
• Periodically check all components for tightness.
Contents - 2 Piece Set
Front Driver
Side Visor
Contents - 4 Piece Set
Front Driver
Side Visor
Tools Required
Preparation Before Painting / Installation
• A trial fit is recommended to ensure proper positioning and fit. Note that the visors are stamped with an
L or R following the part number, indicating Left or Right side placement.
• Check fit of parts before painting as we will not accept the return of modified or painted parts.
• Wash your vehicle to remove any debris and/or dirt.
• Dry with a clean towel.
Installation Steps
Roll down window. Buff the inside felt surface
with scotch brite pad. Then clean with alcohol
clean
1
NOTE: visors mount on the inside of the window
Installation Instructions
Ventvisor
NOTE: Actual product may vary from illustration.
Front Passenger
Front Passenger
Side Visor
Car Wash Supplies
NOTE: Actual application may vary slightly from illustrations.
pad.
inside of vehicle
channel.
Deflector
®
Alcohol Pad x2
Side Visor
Rear Driver Side Visor
Rear Passenger Side Visor
Clean Towel
Remove the tape liner from the front & rear flanges.
Peel back 2" of tape liner from each end of top flange.
free end
remove
2
Page 1 of 2
I - Sheet Number LUNDVV154 Rev.A
Scotch Brite
Pad
C1 clips x2
Alcohol
Pad x4
Flathead screwdriver
top flange
free end
remove
Scotch Brite
Pad