Télécharger Imprimer la page

Rowenta ARTIK IONIC VU9010 Mode D'emploi page 9

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 10
NC00002663 VU9010
12/09/07
SAFETY POINTS FOR REWIREABLE/MOULDED PLUG
The main lead of this appliance is fitted with a BS1363A plug.
If your socket outlet is not suitable for the plug, then the plug must be removed (cut off if it is
a moulded plug), the flexible cord insulation should be stripped back as appropriate and a suitable
3 pin plug fitted.
Warning: Dispose of a plug that has been cut from the power supply cord, as such a plug is hazardous
if inserted in a live 13A socket outlet elsewhere in the house.
Should the fuse need to be replaced an ASTA marked fuse, approved to BS1362, of the same rating
must be used.
Always replace the fuse cover after fitting a fuse.
The plug must NOT be used if the cover is omitted or lost until a replacement is obtained -
make certain that only the correct fuse cover is used and fitted.
For plugs with a detachable fuse cover the replacement must be the same as the colour insert
in the base of the plug, or as directed by the embossed wording on the base of the plug.
If the detachable fuse cover is lost a replacement may be purchased from the Rowenta Service Centre
(see enclosed Service Information leaflet).
Information for supply may also be obtained from the plug manufacturer.
WIRING INSTRUCTIONS (FOR U.K. ONLY).
Important: the wires in this lead are coloured in accordance
with the following codes Blue, Neutral, Brown, live. Please read
the instructions given below before connecting the cord to
a plug. If in doubt, please consult a qualified electrician.
As the colours of the wires in the mains lead of this appliance
may not correspond with the coloured markings identifying
the terminals in your plug, proceed as follows:
• the wire which is coloured BLUE must be connected to the terminal which is marked with the letter
" N " or coloured BLACK.
• the wire which is coloured BROWN must be connected to the terminal which is marked with
the letter " L " or coloured RED.
Neither core is to be connected to the earth terminal of a three-pin plug.
This appliance requires a 3 fuse ASTA approved to BS 1362.
SERVICE/SPARE PARTS.
Rowenta (UK)Limited has a network of Service Agents throughout the country; to telephone your
nearest Rowenta Service Centre see enclosed Service Information leaflet; these Service Agents carry
out in-guarantee repairs (free of charge) and out-of-guarantee repairs (chargeable) on behalf
of Rowenta. Should service be required, or the appliance appear faulty, consult your local Rowenta
Service Agent in the first instance. If a product develops a fault during the guarantee period,
it is the reponsibility of the consumer to supply to the Service Agent proof of the date of purchase
of the appliance (eg. completed guarantee card and/or receipt showing the date of purchase).
GUARANTEE (UK ONLY)
Details of the Rowenta guarantee are shown on the Guarantee Card enclosed with the appliance.
This guarantee does not affect your statutory rights.
Should further information be required please see the enclosed Service Information leaflet.
HELPLINE:
If you have any product problems or queries, please contact our Customer Relations Team first
for expert help and advice:
0845 602 1454 - UK
(01) 4751947 - Ireland
www.rowenta.co.uk
15:19
Page 9
Brown
or red
Blue or
Fit correct
N
black
fuse
Use
cable
gripper
L

Publicité

loading

Ce manuel est également adapté pour:

Artik ionic vu9010y0Artik ionic vu9010f0Artik ionic vu9010w0