Rowenta ARTIK IONIC VU9010 Mode D'emploi page 8

NC00002663 VU9010 12/09/07
Pre-select the start-up speed according to your needs (see table above),
then select REDUCTION mode or VARIATION mode (using method described below):
- Press the "B" button once; "VARIATION" mode is activated and the "VARIATION" indicator
comes on.
- Press the "B" button again; "REDUCTION" mode is activated and the "REDUCTION" indicator
comes on.
- Press the "B" button again to stop this function.
• "A" button:
- Press the "A" button once; the appliance starts up at speed 1 and indicator
- Press the "A" button a second time; the appliance changes to speed 2 and indicator
- Press the "A" button a third time, the appliance changes to speed 3 and indicator
- If you press the "A" button again, the appliance changes back to speed 1 and indicator
• "E" button, immediate appliance shutdown:
- Press the "E" button to completely shut down the appliance.
IMPORTANT:
It is recommended that you unplug your appliance whenever it is not in use.
CLEANING
• Your appliance must be unplugged before proceeding with any cleaning work.
• You can clean it with a slightly damp cloth.
• IMPORTANT: Never use abrasive products which might damage the appearance of your appliance.
STORAGE
• When you are not using your appliance, store it in a dry place.
IN THE EVENT OF PROBLEMS
• Never dismantle your appliance yourself, this will negate any guarantee. A poorly repaired appliance
may be dangerous for the user.
• If the appliance ceases to operate or is damaged in any way, contact one of our authorised
service centres.
ENVIRONMENT PROTECTION FIRST!
Your appliance contains valuable materials which can be recovered or recycled.
Leave it at a collection point.
15:19 Page 8
V a r i a t i on
S T O P
R e du c ti o n
comes on.
comes on.
comes on.
comes on.
GB