Publicité
Les langues disponibles
Les langues disponibles
Indicators on LCD
Information are displayed when
the remote controller is powered
up.
How to use the buttons
3
ON/OFF
1
MODE
TEMP
FAN
SLEEP
TURBO
Mode display
AUTO
COOL
HEAT
FAN
Displayed when data transmitted.
Displayed when remote controller is ON.
Battery display(low battery detection)
Not available for this unit
Displayed when TIMER ON time is set.
Displayed when TIMER OFF time is set.
Show set temperature or room
temperature, or time under TIMER
setting.
Displayed in Sleep Mode operation.
Not available for this unit
Not available for this unit
Not available for this unit
Fan speed indication
Note:
All indicators shown in the figure are for the purpose
of clear presentation. But during the actual operation
only the relative functional signs are shown on the
display window.
Auto operation
Ensure the unit is plugged in and power is
available. The OPERATION indicator on the
display panel of the indoor unit starts flashing.
1. Press the MODE button to select Auto.
2. Press the UP/DOWN button to set the
desired temperature. The temperature can
be set within a range of 17 C~ 30 C in 1 C
increments.
3. Press the ON/OFFbutton to start the air
2
conditioner.
SHORT
CUT
NOTE
1. In the Auto mode, the air conditioner can logically
TIMER
ON
choose the mode of Cooling, Fan, and Heating
by sensing the difference between the actual
TIMER
ambient room temperature and the setting
OFF
temperature on the remote controller.
2. In the Auto mode, you can not switch the fan speed.
It has already been automatically controlled.
LED
3. If the Auto mode is not comfortable for you , the
desired mode can be selected manually.
68
DRY
Low speed
Medium speed
High speed
Auto fan speed
O
O
O
Publicité
