90518623 BD Circ Saws
• For indoor use only.
• This product is intended for use in a temperature range of 41°F(5°C) - 104°F(40°C).
SAFETY GUIDELINES - DEFINITIONS
It is important for you to read and understand this manual.
The information it contains relates to protecting YOUR
SAFETY and PREVENTING PROBLEMS. The symbols below are used to help you
recognize this information.
DANGER:
Indicates an imminently hazardous situation which, if not avoided, will result
in death or serious injury.
WARNING:
Indicates a potentially hazardous situation which, if not avoided, could
result in death or serious injury.
CAUTION:
Indicates a potentially hazardous situation which, if not avoided, may result
in minor or moderate injury.
CAUTION:
Used without the safety alert symbol indicates potentially hazardous situation
which, if not avoided, may result in property damage.
The label on your laser may include the following symbols.
V ................................volts
nm..............................wavelength in
IIIa..............................Class IIlA Laser
The label on your tool may include the following symbols.
V ..........................volts
Hz ........................hertz
min ........................minutes
......................direct current
.......................... Class II Construction
........................safety alert symbol
.../min ....................revolutions or reciprocations
For your convenience and safety, the
following labels are on your laser.
(BDCSL1806)
4/2/07
2:33 PM
Page 6
nanometers
per minute
6
mW......................milliwatts
A..........................amperes
W ........................watts
......................alternating current
n o ........................no load speed
........................earthing terminal