Braukmann FreshVAC VF 500 Mode D'emploi page 35

16.2 Appliance diagram
A box for roll
B cutter
C1 Lower gasket + C2 Upper gasket (do not remove)
D Sealing profile: Presses the bag tightly against the sealing bar (F).
E Vacuum chamber: Position the open end of the bag inside the chamber.
F Sealing bar:
seal but not to stick to the strip.
► Do not remove the Teflon tape.
WARNING
Please observe the following safety notice to reduce the risk of burns.
► Never touch the sealing bar while the unit is operating.
G Air intake: G1 Air intake connects with vacuum chamber and pump. Do not cover this
air intake when placing bag for Vacuum&Seal operations.
G2 To insert the hose for vacuuming canister or wine stopper.
H Lid release buttons: Press on both sides to open the lid and take out the bag.
Contains a heating wire covered with teflon which allows the bag to
Please note
35