Flex CHE 4-32 SDS-plus Notice D'instruction D'origine page 11

CHE 4-32 SDS-plus
Contents
Symbols used in this manual . . . . . . . . 11
Technical data . . . . . . . . . . . . . . . . . . . . 11
Overview . . . . . . . . . . . . . . . . . . . . . . . . 12
Important safety information . . . . . . . . . 13
Noise and vibration . . . . . . . . . . . . . . . . 14
Instructions for use . . . . . . . . . . . . . . . . 14
Maintenance and care . . . . . . . . . . . . . . 17
Disposal information . . . . . . . . . . . . . . . 18
conformity . . . . . . . . . . . . . . . . . . . . 18
Exemption from liability . . . . . . . . . . . . . 18
Symbols used in this manual
WARNING!
Denotes impending danger. Non-
observance of this warning may result in
death or extremely severe injuries.
CAUTION!
Denotes a potentially dangerous situation.
Non-observance of this warning may result
in injury or damage to property.
NOTE!
Denotes application tips and important
information.
Symbols on the power tool
Before switching on the power
tool, read the operating manual!
Wear protective goggles!
Wear ear defenders!
Use lightweight breathing
protection!
Disposal information for the old
machine (see page Disposal
information)!
Technical data
Hammer drill and chisel
hammer
Rated power
No-load speed
No-load impact rate
Max. single impact
energy (according to
"EPTA procedure
05/2009")
Lubrication
Tool holder
Max. drill diameter
– concrete
– masonry
– (HM drill bit)
– wood
– metal
Weight according to
"EPTA procedure
01/2003"
Protection class
CHE 4-32
SDS-plus
W 900
rpm 0–850
rpm 0–3700
J 4.8
Grease
SDS-plus
mm 32
mm 82
mm 32
mm 13
kg 4.6
II/
11