Publicité
Les langues disponibles
Les langues disponibles
ASSEMBLY
Before each use, verify that the unit is in good condition, the electric cord is not damaged,
if the power cord is damaged, it must be replaced by the manufacturer or a competent
qualified electrician or a person with similar qualifications, in order to avoid any risk.
If in doubt, have the appliance checked or assembled by a qualified professional person.
For assembly, refer to figure.
Attention: the fan can be used only when completely and correctly assembled, that is
complete with its base and protection grid.
Attention: always unplug the appliance before you assemble.
Stand
1.
Cross the two feet (7) and attach them to the fixed pole (11) with the 4 screws (6).
2.
Unscrew the fixed pole ring nut (5) and slide if off; insert the cover (10) to cover the
junctions between the feet and the fixed pole.
3.
Lengthen the adjustable pole (9) until the height desired and lock it by tightening the
pole attachment ring nut.
1) Motor shaft
2) Oscillation button
3) Body
4) Body attachment screw
5) Pole attachment ring nut
6) Feet attachment screw
7) Foot
8) Selector
9) Adjustable pole
10) Cover
11) Fixed pole
12) Front grille
13) Fan attachment ring nut
14) Fan
15) Grille attachment ring nut
16) Rear grille
17)
Handle
14/40
Publicité
