Publicité
Les langues disponibles
Les langues disponibles
INSTALLATION
Lighting
EN 10
• Let the filter dry in the oven for at least 1 hour at a maximum
temperature of 80 °C. After a maximum of 3 years (or when the filter
is damaged), the filter will need to be replaced.
• It is important that the grease filters and the regenerable
activated carbon filter are properly dried before installation.
The functioning of the the combi odour/fine particle filter
The combi odour/fine particle filter filters not only odours, but also fine
dust particles that are mainly created during cooking, up to PM 2.5
(Particulate Matter PM 2.5: a diameter smaller than 2.5 micrometres).
Replacing the combi odour/fine particle filter
The odour/fine particle filter must be replaced at least annually. To
replace the filter, follow the instructions supplied with the new filter.
2x
Important:
The saturation of the filter depends on the intensity of use, the manner
of cooking and the regularity with which the grease filters are cleaned.
This hood is fitted with a light system. This light system has to be
replaced by an authorized technician. Do not attempt to replace it
by yourself.
The lamp in this household appliance is only suitable for
illumination of this appliance. The lamp is not suitable for
household room illumination.
Publicité
