Atag WS602 JM Serie Notice D'utilisation page 42

USE
Controls
L4
L3
EN 6
Switching the extraction on and off
Turn the rotating disk clockwise to switch on and increase the
extraction speed. Turn counter-clockwise to decrease or switch off the
extraction speed.
The illumination around the edge of the rotating disk switches on to
indicate the selected extraction speed.
• L1 lit: speed 1 (minimum).
L1
• L1 + L2 lit: speed 2 (medium).
• L1 + L2 + L3 lit: speed 3 (maximum)
• L1 + L2 + L3 + L4 lit in flashing mode: speed 4 (intensive). Lasting
for 5 minutes, then the hood is placed automatically at speed 2.
• L1 + L2 + L3 + L4 off: motor off.
L2
Switching the lighting on and off
Push the rotating disk to switch on and off the lighting.
PUSH