Holmatro PCU50 Mode D'emploi page 38

EN
/i
1 Dust cap
2 On-tool charge connector
3 Deadman's handle
4 Tool temperature indicator
5 Maximum force indicator
6 Light switch for LEDs
7 Battery pack fitting / adapter fitting
8 Carrying handle
9 LEDs
10 Battery pack
11 Battery temperature indicator
3.4 User interface of the tool
/i
1. on/off switch for
LEDs in carrying
handle.
2. Maximum force
reached when green.
3. Temperature of the
tool.
3.5 Technical specifications
/i
Description
max. working pressure
hydraulic oil type
vibration level
protection rate
sound emission @ 1m/3.25ft dB(A)
sound emission @ 4m/13ft
temperature range
directives
1. The tool and battery pack can be put fully into in fresh water at a
maximum depth of 1 meter for 30 minutes.
/i
Description
max. cutting opening
38
All manuals and user guides at all-guides.com
User interface Color Condition
Unit
(bar/MPa)
psi
-
m/s²
-
dB(A)
°C
°F
-
Unit
mm
in
916.400.096_003
12 On/off switch
13 State Of Charge (SOC) indicator (see section 3.6.2)
14 Battery pack lock
15 Centre bolt
16 Centre nut and lock ring
17 Blade cutting edge
18 Blade
19 Protective sleeve
20 Hinge pin
21 Snap ring
Color: red, flashing
The tool is too hot.
Color: red
The tool is almost too
hot.
Color: green
The temperature is ok.
General
720 / 72
10443
ISO-L HV VG 36
< 2,5
1
IP57
75
66
-20 + 55
-4 + 131
2006/42/EC, 2014/30/EU
PCU50
182
7.2
Action / Solution
Stop the tool.
Cool down the tool.
Slow down the operation.
Normal operation
PCU50