Publicité
Les langues disponibles
Les langues disponibles
Disconnecting the connected cooking zones
• Press the touch control
on the display.
HEAT MODE
By setting the cooking zone to the heat mode, the induction hob keeps the food hot between 40-70°C.
Setting: switch on the required cooking zone by activating the accompanying slider control and immediately press the heat
mode key to set the heat mode. If the heat mode is active, [
To switch off the heat mode, you must touch the slider control.
SAFE AUTOMATIC SWITCHING OFF
Each cooking zone is switched off automatically after a defined maximum cooking time, if the power has not been changed.
The maximum cooking time depends on the selected power.
Power
1 - 3
4 - 6
7 - 9
CHILD LOCK / KEY LOCK
The child lock prevents unintended use of the induction hob. Once the induction hob has been switched on, the child lock
can be activated. Do not set a cooking zone. To switch on the child lock, press the + and - keys at the same time.
[Lo] (Locked) appears on the display and indicates that the operation cannot be changed.
Changes to a higher power or other changes are not possible.
When activating the child lock while the induction hob is being used, the following indication [Lo] starts to flash.
The induction hob remains locked until this lock is cancelled, even if the induction hob is switched off and on again.
To deactivate the child lock, you must first switch on the induction hob. Press the + and - keys at the same time.
[Lo] disappears.
SETTING THE TIMER FUNCTION
The timer function can be used in two ways: cooking alarm and cooking timer.
Cooking alarm
The cooking alarm can only be used when the induction hob is being used. Switch on the induction hob and press the
of the timer and the display shows 10. Set the new required time using the + and - keys. The cooking alarm can be set from
0 to 99 minutes. If no keys are pressed for a period of 10 seconds, the time stops flashing and counts down.
When the set time has expired, a beep signal sounds and the display shows _ _.
To change the time, press the
Cooking timer
The cooking timer is coupled to a cooking zone and can be set separately for each cooking zone. Contrary to the cooking
alarm, the cooking timer switches off the cooking zone when the set time has passed.
• Switch on the induction hob and select a cooking zone.
• Adjust the power by means of the slider control
• Press the
or
key of the timer and set the required cooking time using the + and - keys. Next to the set power,
an extra LED (dot) lights up on the accompanying display. Now the timer is functioning as a cooking alarm.
• When the time is set, the display shows the time that will expire first (if several cooking zones have been programmed).
To set an additional cooking timer, proceed as follows:
• Select a different cooking zone.
• Adjust the power by means of the slider control
• Press the
or
key of the timer and set the required cooking time using the + and - keys. Next to the set power,
an extra LED (dot) lights up on the accompanying display. Now the timer is functioning as a cooking alarm.
• When the time is set, the display shows the time that will expire first (if several cooking zones have been programmed).
When the set time has expired, a beep signal sounds and the timer shows "_ _". The programmed cooking zone is switched
off and "H" appears on the display if the area of the cooking zone is hot.
28
•
English
to switch off the bridge mode. If the cooking zones concerned are hot, an [H] can be seen
Safe automatic switching off after:
8 hours
4 hours
2 hours
key once more and adjust the time with the + and - keys.
] appears on the accompanying display.
I
.
.
key
Publicité
