Danby DAS170GBHWDB Guide D'installation page 6

INSTALLATION INSTRUCTIONS
INDOOR UNIT INSTALLATION
Before installing the indoor unit, refer to the label on the product box to ensure that the model number on
the indoor unit matches the model number on the outdoor unit. The indoor unit model number will end with
a "-I" and the outdoor unit model number will end with a "-O", otherwise they should be identical.
Step 1: Select Installation Location
Proper installation locations meet the following standards:
• Good air circulation.
• Convenient drainage.
• Noise from the unit will not be disturbing.
• Firm and solid location that will not vibrate.
• Strong enough to support the weight of the unit.
• At least 1 m (3 feet) away from all other electrical devices, such as televisions, radios and computers,
which could impact the infrared remote signal.
Do not install the indoor unit in locations that have the following:
• Near any source of heat, steam or combustible gas.
• Near fl ammable items such as curtains or clothing.
• Near any obstacle that might block air circulation.
• Near any doorway.
• In direct sunlight.
Refer to the below illustration to ensure proper distance from surrounding walls and ceiling:
5