GB
Instructions for use RL70EP
General information
Designated use:
Intended purpose:
Floor light for indoor and outdoor
operation. The light is protected
against penetration of liquids (pro-
tection type IP 67).
Place of use:
Not suited for rooms subject to
danger of explosion.
Operating mode:
The light is designed for continuous
operation.
The manufacturer cannot be held liable for damage caused
by using the light for other than the intended purpose or by
non-observance of safety instructions and warnings.
8
Safety information:
The light must not be operated
in rooms subject to the risk of
explosion!
For using the light outdoor, it has to
be anchored with suitable screws,
so that it is stable.
For inside use, the light has to be
positioned with the base (7), so
that it is stable.
Mounting and connection of the
light must be carried out only by a
qualified electrician!
For lights of international
protection class I the pro-
tective earth conductor must be
connected to the corresponding
terminal of the light.
Abbreviations and symbols:
Attention, observe accom-
panying documents!
PE terminal
(Class I appliance)
Observe the disposal
instructions!
VDE-Approval
CE-mark of conformity