Waldmann RL70EP Mode D'emploi page 10

GB Instructions for use RL70EP
Maintenance
Disconnect the light from the
mains before carrying out any
maintenance or repair work!This
work must be carried out only by a
qualified electrician!
10
Replacing the lamp
We recommend to turn the light
on one side when changing the
lamp.
Pull the lamp (1) upwards out of the
stand column (2). Before doing this,
first loosen the five screws (4).
The protective tube (G) can be
pulled off upwards after having
loosened the three screws (F) on
the lower side of the light.
You can replace the lamp after
removal of the covers (H).
G
H
Carry out the assembly in reverse
order.
Store the cable with the cable
coupler in the stand column before
positioning the light.
Care
Please use a cloth and normal
household cleaning agent to clean
the light parts.
Please ensure that the cleaning
agents used do not damage paints
and plastics.
F
Disposal
Return the unit at the end of
its service life to the availab-
le recycling systems.
Defective fluorescent lamps must
be disposed of as special waste.